上海雄翌网络技术有限公司

Cisco Industrial Ethernet 2000 Series Switches

Product Overview

The Cisco^® Industrial Ethernet 2000 (IE 2000) Series is a range of compact, ruggedized access switches that handle security, voice, and video traffic across industrial networks. They provide customers in industries such as automotive, oil and gas, mining, transportation, and energy with highly secure access and industry-leading convergence using Cisco Resilient Ethernet Protocol (REP).

Product Details

The Cisco IE 2000 Series are designed for low cost, low ports, and small sizes. They offer:

Four, eight, or 16 10/100Base-T Ethernet ports (Small Form-Factor Pluggable [SFP] downlinks on selected models);

fixed configurations with a compact form factor

Two gigabit combo ports: SFP (100 Mbps and 1 Gbps) or RJ45 uplink

Dual-input DC power supply, alarm relays, DIN rail mount

Industrial Power over Ethernet (PoE) solution

Conformal coating available

Swappable SD flash card and mini-USB connector

Industrial environmental compliance and certifications

Industrial partner applications: Ethernet/IP and PROFINET

Primary Benefits and Features

Easy deployment: Zero-touch discovery using Dynamic Host Control Protocol (DHCP), express setup, and fast bootup time (60 seconds) to help in migrating to an Ethernet environment without resistance.

Security: 802.1x, port security, and DHCP allow dynamic port-based authentication; Secure Shell (SSHv2); SNMPv3 provides encrypted administrator traffic during Telnet and SNMP sessions; TACACS+ and RADIUS authentication facilitate centralized control and restrict unauthorized users.

Resiliency: Flex links for fast recovery; Cisco REP protocol for fast convergence.

Manageability: Auto SmartPort, Web Device Manager, Telnet, HTTPS access, SNMP, CNA, and Cisco Prime Infrastructure 1.2.1.

Network Address Translation (NAT): Line-rate, hardware-enabled 1:1 static address translation designed to enable duplicate IP address usage in the Layer 2 machine node networks.

Industrial PoE: PoE (IEEE 802.af) and PoE+ (802.3at) supported on selected models.

Industrial automation protocols: Common Industrial Protocol (CIP) and PROFINETv2 allow integration with existing management platforms from Rockwell, Siemens, and others.

Product Specifications

Switch Performance and Scalability

* Line-rate, nonblocking uplink, downlink ports

* Forwarding rate: 6.5 Mpps with 64-byte packets

* Egress buffer: 2 MB

* Unicast MAC addresses: 8000

* Internet Group Management Protocol (IGMP) multicast groups: 255

* Maximum virtual LANs (VLANs): 255

* IPv4 MAC security ACEs: 384 (default ternary content-addressable memory [TCAM] template)

* Bidirectional, 128 NAT translation entries

Detailed Product Information

Figure 1 shows switch models, and Table 1 shows the Cisco IE 2000 Series configuration information. Table 2 lists the SKUs for power supplies and license upgrades. Table 3 includes IE 2000 Series product specifications. Table 4 lists software features. Table 5 includes compliance specifications. Table 6 outlines management and relevant industry standards.

Figure 1.Industrial Ethernet 2000 Series

Table 1.	Industrial Ethernet 2000 Series Configurations
IE-2000-4TS-L¹		6	4 FE		2 FE	LAN Lite
IE-2000-4TS-B		6	4 FE		2 FE	LAN Base
IE-2000-4T-L		6	6 FE			LAN Lite
IE-2000-4T-B		6	6 FE			LAN Base
IE-2000-4TS-G-L		6	4 FE		2 GE	LAN Lite
IE-2000-4TS-G-B		6	4 FE		2 GE	LAN Base
IE-2000-4T-G-L		6	4 FE, 2 GE			LAN Lite
IE-2000-4T-G-B		6	4 FE, 2 GE			LAN Base
IE-2000-4S-TS-G-L		6			4 FE, 2 GE	LAN Lite
IE-2000-4S-TS-G-B		6			4 FE, 2 GE	LAN Base
IE-2000-8TC-L		10	8 FE	2 FE		LAN Lite
IE-2000-8TC-B		10	8 FE	2 FE		LAN Base
IE-2000-8TC-G-L		10	8 FE	2 GE		LAN Lite

IE-2000-8TC-G-B	10	8 FE	2 GE		LAN Base
IE-2000-8TC-G-E²	10	8 FE	2 GE		LAN Base	X	X
IE-2000-16TC-L	20	16 FE	2 FE	2 FE	LAN Lite
IE-2000-16TC-B	20	16 FE	2 FE	2 FE	LAN Base
IE-2000-16TC-G-L	20	16 FE	2 GE	2 FE	LAN Lite
IE-2000-16TC-G-E	20	16 FE	2 GE	2 FE	LAN Base	X	X
IE-2000-16TC-G-X	20	16 FE	2 GE	2 FE	LAN Base	X	X		X
IE-2000-8TC-G-N	10	8 FE	2 GE		Enhanced	X	X
					LAN Base
IE-2000-16TC-G-N	20	16 FE	2 GE	2FE	Enhanced	X	X
					LAN Base
IE-2000-16PTC-G-L	18	16 FE	2 GE		LAN Lite			X
IE-2000-16PTC-G-E	18	16 FE	2 GE		LAN Base	X	X	X
IE-2000-16PTC-G-NX	18	16 FE	2 GE		Enhanced	X	X	X	X
					LAN Base

1.“-L” models are field-upgradable from LAN Lite to LAN Base.

^1.“-E” models are field-upgradable from LAN Base to Enhanced LAN Base for NAT-capable

Table 2.	Power Supply and License Upgrade
PWR-IE50W-AC-IEC		AC to DC 24V/2.1A DIN Rail power supply, input I00-240VAC/1.25A 50-60Hz, output 24VDC/2.1A, IEC Plug
PWR-IE50W-AC		AC to DC 24V/2.1A DIN Rail power supply, input 100-240VAC/1.25A or 125-250VDC/1A, output 24VDC
PWR-IE65W-PC-AC		AC to DC DIN Rail power supply for POE, input 100-240VAC1.4A, 50-60Hz or 125-250VDC/1A; output
		54VDC/1.2 A
PWR-IE65W-PC-DC		DC to DC DIN Rail power supply for PoE, Input 18-60 VDC/4.3A, Output 54VDC/1.2A
SD-IE-1GB		1 GB Ruggedized SD memory card
STK-RACKMNT-2955		19 in. DIN Rail mount kit
L-IE2000-L-B=		IE2000 LAN Lite to LAN Base e-license
IE2000-L-B=		IE2000 LAN Lite to LAN Base paper license
L-IE2000-B-E=		IE2000 LAN Base to Enhanced LAN Base e-license
IE2000-B-E=		IE2000 LAN Base to Enhanced LAN Base paper license

Table 3.	Product Specifications
Description		Specification
Hardware		● 256 MB DRAM with ECC memory
		● IEEE 1588v2 FPGA
		● 64 MB on-board flash memory
		● 1GB removable SD flash memory card (optional)
		● Mini-USB connector
		● Alarm I/O: Two alarm inputs to detect dry contact open or close; one alarm output relay
Power Consumption		● 4-port downlink models: 9.5-15 W
		● 8-port downlink models: 12.5-20 W
		● 16-port downlink models: 21-30 W
		● 4-port PoE/PoE+ models: 21-30 W (16-port base switch) and 4 PoE/PoE+ power requirement
Connectors and Cabling		● 100BASE-FX MMF (2 km), -LX SMF (10 km) -ZX SMF (100 km), BX10 SMF (10 km) SFP and CWDM
		SFP-based ports: LC fiber connectors
		● 10/100/1000BASE-T ports: RJ-45 connectors, 4-pair Category 5 UTP cabling